English
Español
中文简体
E-mail: info@zjnewway.com
E-mail: sales1@chinasuptec.com
Phone:+86 13586284666
The can Beer filling machine is widely used in the beer and beverage industry. The filling work of the entire beer and beverage industry requires the use of can filling equipment. During the use of the can filling machine, it is often encountered because of wrong operation methods. As a result, the filling efficiency and filling accuracy of the can filling machine are greatly reduced, and the serious wrong operation will also cause the early scrapping of the can filling equipment. It can be seen that it is very important to master the correct operation method of the can filling machine.
The correct operation method of the can filling machine:
1. Before using the can filling machine, you need to read the instruction manual carefully to ensure the correct operation of the beer filling machine.
2. Place the can filling machine stably and fix it.
3. Use DN25 pressure-resistant hose to connect the liquid inlet of the isobaric filling machine with the liquid outlet of the beer buffer tank (sake tank), and the connection is firm and reliable; It is connected with the backup pressure pipe of the beer buffer tank to ensure that the filling pressure of the filling machine is consistent with the pressure in the beer buffer tank.
4. Connect the power supply (single-phase 220 volts), compressed air source (air source pressure should not be lower than 0.4 MPa), use PU pipe with outer diameter ∮ 10mm, and add about 2/2/2 to the oil cup on the right side of the air source processor AFC2000. 3 cups sewing machine oil.
5. Adjust the filling height according to the height of the filling barrel or bottle. The height of the bottle mouth should be the same as or 1~5mm lower than the lower mouth of the air inlet (return hose) of the filling valve. A special bottle holder can be used for PET bottles. According to the height of the bottle mouth, it can be adjusted at one time.
The correct use and operation method of the can filling machine is what every beverage company must master. Only by mastering the correct use method of the filling equipment can more value be created for the enterprise. The above is the correct operation method of the can filling machine. For a detailed introduction, you can refer to the instruction manual of the can filling machine for the specific operation method, and often carefully check whether the equipment is running normally, so as to reduce unnecessary losses for the enterprise.
.jpg?imageView2/2/format/jp2 "XWYDJ Liquid nitrogen feeder")
-1.jpg?imageView2/2/format/jp2 "XWKGJ(18B、32B) (Corn) Granule Tanker")
